Input voltage: single phase 220v AC
Output voltage: three phase 0~rated input voltage
Rated power: 0.4kw (0.5HP)
Rated current: 2.5amp
Start/stop of the drive
When the drive is powered on, it displays stop status, with no output voltage.
If Parameter F0.01 is set as 0，the set point is from keypad, press RUN key to run the
drive. The drive starts, and it outputs the voltage.
During running, if Parameter F0.01 is set as 0， the set point is from keypad, press
STOP/RST key to stop the drive, it ceases to output the voltage.