High performance frequency converter

- Jan 03, 2019 -

Running command source:Operation panel,Control terminals,Serial communication port

You can perform switchover between these sources in various ways.

Frequency source:There are a total of 10 frequency sources, such as digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting. You can perform switchover between these sources in various ways.

Auxiliary frequency source:There are ten auxiliary frequency sources. It can implement fine tuning of auxiliary frequency and frequency synthesis。

Input terminal:Standard:

5 digital input (DI) terminals, one of which supports up to 100 kHz high-speed pulse input

2 analog input (AI) terminals, one of which only supports 0–10 V voltage input and the other supports 0–10 V voltage input or 4–20 mA current input

Expanding capacity:

5 DI terminals

1 AI terminal that supports -10–10 V voltage input and also supports PT100\PT1000

Output terminal:Standard:

1 high-speed pulse output terminal (open-collector) that supports 0–100 kHz square wave signal output

1 digital output (DO) terminal

1 relay output terminal

1 analog output (AO) terminal that supports 0–20 mA current output or 0–10 V voltage output

Expanding capacity:

1 DO terminal

1 relay output terminal

1 AO terminal that supports 0–20 mA current output or 0–10V voltage output

Related Products