Input voltage: single phase 220v
Output voltage: three phase 0~rated input voltage
Rated power: 1.5kw (2HP)
Rated current: 7amp
Note ： ： When selecting vector control, it is necessary to conduct the self
learning of motor parameters. Only with accurate motor parameters can the
vector control work well. Adjusting the parameters of speed regulator （group
F3) can get better performance.
Code Name Range
To select the channel of drive’s control command.
The drive’s control commands include start,stop,rotate,reverse-rotate,jog,reset, etc.
0：Keypad command channel (“LOCAL/REMOT”extinguished)；
Press the key RUN & STOP/RST to control. If function key QUICK/JOG is
configured as FWD/REV switching（F7.03 being set as 1)，the key can be used to
reverse the rotation